THERMOBREAK® 挤出机停机保护母料


性能描述

HERMOBREAK® ​is a specialty preparation designed as extruderprotection during production breaks. Prevents formation ofburn-insinside acylinderand considerably reduces the time-period necessary for its purging. Considerably reduces the purgingtime and enhances economy of production. Available on PP or LDPE carrier matrix.
THERMOBREAK®专为保护挤出机生产中停机而设计,其可预防机筒烧损,并大大减少清洗时间,从而提高生产的经济效率。可用于PP和LDPE的载体基质。

Description
描述
THERMOBREAK is a specialty polymerdesigned as extruder protection during the production breaks.
THERMOBREAK母料是一种为保护挤出机生产中停机而设计的特殊聚合物。
Function
功能
The presence of THERMOBREAK in an extruder during the production break (prolonged heat exposure at processing temperature) prevents the formation of burn-ins inside a cylinder and considerably reduces the time-period necessary for its cleaning.
在挤出机生产停机过程中(长时间在加工温度下受热)使用THERMOBREAK母料,可以防止机筒烧损,并降低清洗设备的时间。
Composition
组成
Active components of THERMOBREAKpolymer consist of additives and stabilizer systems providing high resistance towards long-term heat exposure and ability to prevent the formation of burnt-in deposits in the ‘dead’ spaces of an extruder. The carrier matrix is polypropylene or low-density polyethylene.
THERMOBREAK母料的活性成分包括长效耐热的添加剂和稳定剂,能防止挤出机停机过程中形成煅烧沉积物。载体基质采用聚丙烯或低密度聚乙烯。
Advantages
优势
Reduces formation of burn-ins in an extruder during breaks ; Reduces extruder purging time down by 50-70%; Enhances economy of production
减少挤出机停机过程中的煅烧沉积物; 减少50-70%的清洗时间;提高生产经济效益
Properties
性能
All components of THERMOBREAKprotective polymer are non-toxic.
THERMOBREAK防护聚合物的所有成分均无毒。
Application
应用
Empty extruder is fed up with THERMOBREAK and left to cool down or left heated up for few hours during a technical break, e.g. instrument maintenance. At the end of the break, extruder is emptied and purged in a standard way. THERMOBREAKis not intended to be blended, it is used as it is - in the original 100% state.
THERMOBREAK母粒投料到空的挤出机并让其冷却,或者机械停机后(例如,设备检修)设备冷却几个小时后再投料。在停机的最后阶段,挤出机是空的而且必须清洁干净。THERMOBREAK母粒不能和其他物料混合使用,必须使用100%的纯料。
Storage
储存
THERMOBREAKshould be stored at a dry place in the absence of direct sunlight. Material does not require any special way of handling.
THERMOBREAK存储在干燥无阳光照射的地方。不需要特殊的存储方式。
公司动态
版权所有:沪ICP备案17041488号